SSDs use flash memory to deliver significant performance gains compared to mechanical hard drives. Since SSDs do not have small moving parts prone to failure, they offer a wide range of cost-effective benefits to nearly every computer user. However, SSDs can greatly slow down for various reasons over time. If you are in this situation and your SSD is slow, look at the solutions listed below.

Why is my SSD so slow?

There are various reasons your SSD might run too slow. One major cause is the lack of driver optimization. This feature runs the TRIM command on your SSD and helps to keep it in top shape. Another known cause is the wrong boot order setting. Lastly, if you have onboard VGA enabled, it can lead to slow speed on your SSD. ➡️Some of the error variations in this case include:

Slow SSD write speed SSD slow to read Slow SSD boot SSD slow to delete files SSD slow to open programs Slow SSD Windows 11 SSD running slow in Windows 7

You may be encountering one or more of these. But, fret not! The solutions listed here will work in all these cases.

🔧How do I fix a slow SSD?

1. Check the TRIM command

The first workaround that solves the slow SSD issue is to run the TRIM command on your PC only by using the Command Prompt tool, as displayed in the steps below.

  1. Click Start, and in the search bar, type cmd.

  2. Right-click Command Prompt and click Run as Administrator.

  3. Type the command below and press Enter:fsutil behavior query DisableDeleteNotify

  4. If you get 0, it means TRIM is already enabled. If you get 1, please make sure you follow the next steps.

  5. Type this command:fsutil behavior set DisableDeleteNotify 0

2. Optimize drivers

With Windows 10, Microsoft added the Optimize Drives feature, which runs the TRIM command on your SSD. So please check whether Windows is optimizing your SSD. The best optimization for drivers is to run their latest version. If you want to update all drivers on your computer, you should use DriverFix, a software that has a database of over 18 million driver files. ⇒ Get DriverFix

3. Check that AHCI Mode is enabled

AHCI Mode plays a significant role in maintaining the high performance of your SSD and preventing it from running slow. If this mode is disabled, the computer can encounter crashes or even see the famous but unwanted blue screen of death. If AHCI is disabled and you want to enable it on Windows 10, here is what you need to do:

4. Disable onboard VGA

Many users have reported that once they disabled the Onboard VGA feature, they managed to solve their problem. 

5. Configure Boot order

Another reason why the SSD drive is slow could be that the boot sequence is incorrectly configured. If the top priority to boot up is set to hard drive, the fetch and load time for the operating system from an external source will take more time than usual. SPONSORED

6. Check the SATA port

Many motherboards come with two different SATA controllers: some are SATA 3Gbps, and some are SATA 6Gbps. Make sure you use SATA 6Gbps for connecting your SSD. In this respect, you should refer to the motherboard’s manual to determine it correctly. Moreover, motherboards built on Intel chipsets come with the Intel SATA controller. Make sure you use the Intel controller to connect your SSD, as most of the low-speed issues occur from using a non-Intel controller on a motherboard built on an Intel chipset. Also, note that the first SATA port has the highest speed, as most tech-savvy users claim.

7. Verify the SATA cable

For better SSD performance, ensure that the cables are not defective or of poor quality and that it is well hooked up to the SATA port. Thus, a good tip is always to purchase a SATA cable from a well-known manufacturer.

8. Update your firmware

Just like every other computer hardware you own, updating the firmware on your SSD is vital as new bugs and problems get identified and resolved. This may also improve your SSD’s performance, drive stability, or improve compatibility with your system. To check if you need to update the firmware, you must first identify the exact firmware on your SSD and then go on the manufacturer’s website to check if newer firmware exists for your SSD. If so, you will have to follow the instructions for updating.

9. Optimize your SSD

The SSD accumulates junk just like the rest of your computer over time. Thus, you need to optimize it from time to time to bring it to its original shape. In Windows 10, you can do that easily by yourself by following the instructions below or using third-party software in this respect.

10. Choose the High Power Plan

When you choose the Balanced Power Plan, your SSD will not receive the full power it needs to run at its best capacity, leading to slow transfer, read, and write speed.

How can I fix a slow SSD on Windows 11?

Fixing a slow SSD on Windows 11 is pretty simple. Foremost, you can try to optimize your drivers with the built-in feature. Also, you can change your power plan to high performance to release full power for your SSD. You can also try all other fixes in this guide, as they work for Windows 10 and 11.

Do SSDs get slower as they age?

SSDs do not get slower because of age. Instead, other factors make the memory run slow. One of them is filling your SSD to the maximum or near-maximum capacity. This reduces its write time, thereby affecting its overall performance. Some other known factors are wrong PC settings and lack of optimization. So, you don’t have anything to worry about when your SSD age. All in all, we hope this article helped you, and you now get to see improved SSD performance. Similarly, if you need a list of the best SSD management software, check our guide for the excellent options to use today. Feel free to let us know if you were able to get your SSD back up to speed in the comments below.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ