One option is to use a Bluetooth audio receiver, but that’s not the most elegant solution, although it works decently. However, there are ways to fix this problem, so be sure to keep on reading.
What can I do if my car stereo USB port stopped working?
1. Use another USB cable
This is a simplest solution if USB port is not working in car and you’re trying to connect a device via cable.
2. Try another USB drive with your defective port
It’s possible that your USB device isn’t configured properly, or that it’s faulty, so replacing it is a great way to diagnose the issue.
3. Check for any compatibility issues between devices
Many car stereos don’t work with NTFS drives, so always use exFAT or FAT32 drives on your car stereo and other non-Windows devices.
4. Update firmware for both devices
If the car USB port not working, it’s possible that firmware might be the cause.
5. Try using a USB drive with a smaller storage
Sometimes a larger drive might not be fully compatible with your car stereo, so you’ll have to use a smaller size USB. As you noticed, the issue with your car stereo USB not working can have a variety of reasons – compatibility, size of the disk, the power outage, a defective cable, and ultimately a defective USB port. Check them all out and find the source of your problem with the help of our steps. If need to replace your flash drive, be sure to check out our guide on the best flash drives that you can buy. We would love it if you would share your experience with us. Do you have any troubleshooting suggestions? Leave a comment in the section found below this article to contact us.
SPONSORED
Name *
Email *
Commenting as . Not you?
Save information for future comments
Comment
Δ
