Although this can be mind-boggling, the good news is that there are many ways by which you can troubleshoot this issue. You can get rid of it permanently so that you can use your laptop again without any issues. Below, we unpack the options available to fix this black screen.

Why is my HP laptop turning on, but the screen is black?

If the HP laptop is turning on and the screen is black, there could be several reasons for this: 

Faulty monitor – If your HP laptop turns on, but the screen does not respond to any input, it could be a faulty monitor.  Incompatible driver – If you’ve recently installed a new driver, the HP laptop may detect it, but the screen remains black due to incompatibility between the display driver and the hardware. Loose connection – It is possible that the video cable connecting the display device to your computer is loose or disconnected from both devices. This can prevent your laptop from powering up properly and displaying an image on its screen. Hardware failure – If your laptop still boots up and you can hear sounds from inside, you may have a bad motherboard. New programs – If you have recently installed new programs or experienced an HP laptop black screen after a Windows update, they may be causing issues with powering up your HP laptop. Defective display cable – Some models of HP laptops have a separate video cable that connects to the monitor. The video cable may be damaged or defective, and this can cause the monitor to stop working properly. Overheating – Laptops usually overheat because of an improper cooling system or poor ventilation inside the laptop case. Faulty GPU – If your HP laptop has a dedicated GPU, it could be faulty and need replacing.

How do I fix a black screen on my HP laptop?

We recommend that you start with these basic troubleshooting steps before moving to the somewhat technical solutions:

Check the HDMI or video cable for any damage. It’s normal for such to experience wear and tear over time.  Try with another HDMI cable to verify if the previous one is faulty. Try to remove the battery and then plug in the power supply. After that, press the Power button for 30 seconds and then press it again. Remove the RAM and replace it to ensure it is properly seated. Connect via an external monitor and see if the issue persists. Beware that your laptop may fail to detect your monitor. If you have installed an update recently or added new hardware to your computer, try uninstalling or removing these items. Sometimes when you install updates or new hardware, they can conflict with each other and cause problems with how Windows works.  Refresh your display drivers using the Windows shortcut Win + Ctrl + Shift + B.

1. Restart Windows File Explorer 

2. Rollback previous display drivers 

3. Perform a System Restore

This step will only work if you had created a restore point beforehand. If not, skip this step, as you’ll have no previous state to roll back to. SPONSORED Other issues you may experience include an HP laptop black screen with a cursor but worry not, as we have already covered ways to bypass this error. Your laptop may also have served its purpose, and it’s time for a new one. To that effect, we have an excellent recommendation for HP laptops with excellent battery life and other noteworthy features. Let us know if you have been able to resolve this issue in the comment section below.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ