Also, software distribution is much simple nowadays with the Media Creation Tool. However, this, on a paper simple procedure, posed quite a burden for various users. The Windows installation encountered an unexpected error prompt and the consequent installation failures are not uncommon. In order to address this, we prepared a list of possible solutions. If you’re stuck with this error after multiple tries, make sure to check the steps we provided below.
How do I fix the Windows installation error?
1. Check the system requirements
Let’s start with compatibility. Windows 10 isn’t exactly too distinct from Windows 7 when it comes to system requirements. However, there are some disparities, and you should take them into account if you’re installing Windows 10. Extra RAM here and a tad more storage space there can make a great difference. Here are the system requirements you’ll need to meet in order to install Windows 10:
CPU: 1 gigahertz (GHz) or faster processor or SoC RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit HDD space: 16 GB for 32-bit OS 20 GB for 64-bit OS GPU: DirectX 9 or later with WDDM 1.0 driver Display: 800×600
If you met the system requirements, make sure that your installation media is well-created.
2. Check RAM and HDD
Amongst the various hardware issues which can cause installation errors, RAM and HDD sit at the top. We suggest investigating RAM health with the third-party tool called MemTest86. This tool is highly regarded as the best for the job. The thing with it is that you’ll need to mount it on the bootable media in order to work. HDD-wise, you can use the built-in utility or resort to third-party tools to check for bad sectors and health issues. SPONSORED Another thing you can try if the error is persistent after you click Install is formatting the drive via the Command Prompt. This is what you need to do:
3. Switch USB port and the USB drive
Another thing that seemingly slips under the radar is the installation media itself. Even though the majority of USB thumb drives with 6 or more gigs of space will suffice, some might not. For that reason, if possible, switching to an alternative USB flash stick might get you going. As a side note, we recommend sticking with the 2.0 USB drives if you’ve never installed Windows 10 and enabling USB legacy in the BIOS settings. On the other hand, even if the bootable USB drive works fine, the problem might be within the USB port you’re using. Some users managed to address the issue at hand by simply restarting the PC and switching between the USB ports. Finally, you can, if the circumstances allow, try using an ISO file to create a bootable DVD.
4. Remake the installation media with the Media Creation Tool
In the end, if none of the previous steps resolved the issue at hand, we encourage you to remake the bootable drive. The best and the most favorable way is to use the Media Creation Tool. With that said, the whole procedure is rather simplified and it won’t last too much. Of course, this depends on your bandwidth speed. Due to unwelcome circumstances, you can use any other PC to create a bootable installation media for Windows 10. After that, you should be able to install Windows 10 without any issues whatsoever. If the error is persistent, we recommend contacting your computer OEM. And on that note, we can wrap it up. In case you have some additional questions or suggestions, feel free to share them with us. You can do so comfortably in the comments section below.
Name *
Email *
Commenting as . Not you?
Save information for future comments
Comment
Δ
