This can be frustrating, especially if you notice that the Canon scanner is not working but the printer is. Also, if you come across a Canon printer that won’t scan in Windows 10/11 issue, we have a detailed guide to help you troubleshoot the problem. If your scanner is not working, you can turn the scanner off and detach the power cord to perform a hardware reset. Alternatively, you can also visit the Canon support page or contact their customer service to check if the scanner model is compatible with your system configuration. The good news is, that we have effective ways to fix the issue on both Windows 10 and Windows 11. So, what causes the Canon scanner not working issue on your Canon printer?

Why is my Canon printer not scanning?

Whether it’s the Canon MG3620 scanner not working or MX310 not working issue, the scanner issue mostly arises due to:

A new Canon scanner, which may not be compatible with your operating system (OS) An issue with the connectivity, for example, the USB cable is not connected properly to the PC A recent upgrade to Windows 10/11 may require you to update your printer/scanner driver Canon scanner is not connected to your WiFi, hence, check if the WiFi is active and connected Outdated, missing, or corrupted device drivers for the Canon scanner Virus or malware attack or if the system is hacked, causing it to freeze, crash or restart unexpectedly

The first thing you can do is to restart your computer, shut down your scanner for a couple of minutes, and then turn it on the back again. This trick helps correct a lot of issues related to PCs and devices in some cases. If it fails to work and you wonder how I get my scanner to work on my Canon printer, check below for resolutions.

How do I fix the Canon mx310 scanner?

2. Set it to run in the Compatibility mode

Now, check if the Canon MX310 scanner is working and it’s scanning documents normally. This could be the reason why your Canon MX310 driver is missing on Windows 11 and the scanner is not working. In this case, you can try updating the scanner drivers manually. For this, you must visit Canon’s official web page for driver downloads, and look for the required drivers. Once you find what you need, simply download and install them manually. A trustable driver installer tool can also be used to automatically update the Canon MX301 driver. DriverFix is one such program that our software experts tested. It will help you automatically update drivers and prevent PC damage caused by installing the wrong driver version. In addition, you will receive a fully detailed report detailing the exact status of your Windows missing, damaged, or outdated drivers. ⇒ Get DriverFix This should help your scanner start working again.

3. Run the Hardware and Devices troubleshooter

Once done, try scanning with your Canon printer and check if it works.

4. Check the status for the required Windows services

Now, check if your scanner not working problem is fixed.

5. Perform a clean boot

Now, restart your PC, connect the scanner again and check if the issue is resolved.

What else can I do to fix the scanner if it’s not working?

If the above methods fail to work, and you are wondering why is my Canon printer not scanning, here’s what you can do: ➡ Make sure to run a full virus scan at regular intervals, using the built-in or the 3rd party antivirus. This will block any virus or malware intrusion. ➡ Make sure that you connect the USB straight to the PC and not through the USB hub. ➡ Invest in a USB cable that is less than 1 meter in length. ➡ Uninstall the software and install it correctly, if it’s not already. ➡ Try another USB cable, or connect it to a different USB port. ➡ Cross verify the error message on the scanner panel to check for any hardware problem. This method seems to have resolved the Canon scanner not working issue on Windows 11, and also on Windows 10 for many users. Besides, you can also check for any pending Windows Update, which is often the reason for many of the system or device issues. But, if it’s an issue with all the scanners (Epson/HP/Cannon) that is, if your scanner is not detected in Windows, here’s what to do. However, if it’s any other issue you face with the Cannon scanners or any other scanners, you can let us know in the comments box below.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ